Motorola XTR446 specifications Product Safety and RF Exposure for Portable TWO-WAY Radios

6864234V01-A_EN Final2.fm Page 2 Monday, August 14, 2006 3:38 PM

English

2

PRODUCT SAFETY AND RF EXPOSURE FOR PORTABLE TWO-WAY RADIOS

Before using this product, read the

!operating instructions for safe usage contained in the Product Safety and RF

C a u t i o n Exposure booklet enclosed with your radio.

ATTENTION!

Before using this product, read the RF energy awareness information and operating instructions in the Product Safety and RF Exposure booklet to ensure compliance with RF energy exposure limits.

Charger Safety Instructions

Before using the battery charger, read all instructions and cautionary markings on:

•the battery

•the battery charger, and

•the radio using the battery.

!

C a u t i o n

To reduce the risk of injury, only charge the Motorola approved rechargeable battery for this product. Other types of batteries may burst, causing personal injury and damage.

SAVE THESE INSTRUCTIONS

1.Do not expose the charger to rain or snow.

2.Do not operate or disassemble the charger if it has received a sharp blow, or has been dropped or dam- aged in any way.

3.Never alter the AC cord or plug provided with the unit. If the plug will not fit the AC outlet, have the proper outlet installed by a qualified electrician. An improper condition can result in a risk of electric shock.

4.To reduce the risk of damage to the cord or plug, pull the plug rather than the cord when disconnecting the charger from the AC outlet

5.To reduce the risk of electric shock, unplug the charger from the AC outlet before attempting any maintenance or cleaning.

6.Use of an attachment not recommended or sold by Motorola may result in a risk of fire, electric shock, or personal injury.

7.Make sure the cord is located so it will not be stepped on, tripped over, or subjected to damage or stress.

8.An extension cord should not be used unless abso- lutely necessary. Use of an improper extension cord could result in a risk of fire and/or electric shock. If an extension cord must be used, make sure:

•That the pins on the plug of the extension cord are the same number, size, and shape as those on the plug of the charger.

•That the extension cord is properly wired and in good electrical condition, and

•That the cord size is 18 AWG (1 mm2) for lengths up to 100 feet (30 metres) and 16 AWG (1.3 mm2) for lengths up to 150 feet (45 metres).

9.The supply cord of this charger cannot be replaced. If the cord is damaged please return to your place of purchase.