Configuring Windows Administrator
Blank
The NPort is not password protected, and “Broadcast Search” was used to locate it.
Fixed
The NPort is not password protected, and “Search by IP address” was used to locate it.
Lock Fixed
The NPort is password protected, “Specify by IP address” was used to locate it, and the password has not yet been entered from within the current Administrator session.
Unlock Fixed
The NPort is password protected, “Specify by IP address” was used to locate it, and the password has been entered from within the current Administrator session. Henceforth during this Administrator session, activating various utilities for this NPort will not require
Configuring NPort 5410/5430/5340I
Input the password to Unlock the NPort. Right click on a specific NPort and select configure to start the configuration.
The progress bar shows that Administrator is retrieving configuration information from the specific NPort.
Refer to Chapter 5 for each parameter’s function definition.
To modify the configuration, you must first click in the modify box to activate the parameter setting box.
You can simultaneously modify the configurations of multiple NPorts that are of the same model.
To select multiple NPorts, hold down the Ctrl key when selecting additional NPorts, or hold down the Shift key to select a group of NPorts.
