Moxa Technologies Serial Settings, NPort 5600 Series User’s Manual, Web Console Configuration

NPort 5600 Series User’s Manual		Web Console Configuration
	Auto report to IP
	Setting	Factory Default	Necessity
	E.g., 192.168.1.1	None	Optional
	(IP addresses of the form x.x.x.0 and
	x.x.x.255 are invalid.)
	Reports generated by the Auto report function	will be sent automatically to this	IP address.
	Auto report to TCP port
	Setting	Factory Default	Necessity
	E.g., 4001	None	Optional
	Auto report period
	Setting	Factory Default	Necessity
	Time interval (in seconds)	10	Optional

Serial Settings

Click on Serial Settings, located under Main Menu, to display serial port settings for ports 1 and 2.

NOTE: Since this figure was borrowed from the manual of NPort 5200, which has only 2 RS-232 ports, there are only 2 ports shown in this figure. Once you have completed the hardware installation of NPort 5600, there should be either 16 or 8 ports shown in the figure, depending on the model you installed. The steps for changing the settings of the other ports are the same as those for Port 1 and Port 2.

To modify serial settings for a particular port, click on either Port 1 or Port 2 under Serial Settings, located under Main Menu on the left side of the browser window

5-9