![](/images/new-backgrounds/1194278/19427837x1.webp)
Using the Web-Based User Interface
Setting up your computer to use the Web-Based User Interface
The default IP address of the Adapter is 192.168.2.225. You will need to set your computer’s IP address to the same subnet such as 192.168.2.224 before you can access the
1. Go to the Windows Control Panel and
2.
3.In the General tab, select the Internet Protocol TCP/IP settings for your Wireless Adapter and click on “Properties”.
4.Select the “Use the following IP address” radio button.
5.Enter an IP address in the same subnet as the access point (for example, 192.168.2.224).
6.Enter the following subnet mask: 255.255.255.0 then click “OK”.
Warning: Once you have completed configuring your Adapter, you must repeat steps 1 through 3 above and select “Obtain an IP automatically” or set a valid IP for your computer on the same subnet as the network you are connecting to.
1
2
3
4
5
6
7
8
section
17