MTD F5D7330UK manual Knowing your Wireless G Ethernet Adapter, Install the Hardware

Knowing your Wireless G Ethernet Adapter

Install the Hardware

1.Connect the included Ethernet network cable into the LAN port on the back of the Wireless G Ethernet Adapter and plug the other end of the cable to the back of your computer or any other Ethernet-enabled device.

2.Turn on your Adapter by connecting the power supply cable to your Adapter. Then plug the other end into a power outlet.

3.If used for Internet gaming play, the Adapter will work out-of- the-box in most instances. In cases where you need to set up the Adapter for head-to-head play or special settings, you need to run the setup wizard from a PC or configure it using a web- based setup. Non-Windows users, please refer to the “Setting Up your Computer to Use Web-Based Setup” on page 16 of this manual.

1

2

3

4

5

6

7

8

section

9