MT3334ZDX/V Owner's Manual
Command: | Nn | Modulation Handshake |
Values: | n = 0 or 1 | |
Default: | 1 |
|
Description: | N0 | Modem performs handshake only at |
|
| communication standard specified by S37 and the |
|
| B command. |
| N1 | Modem begins handshake at communication |
|
| standard specified by S37 and the B command. |
|
| During handshake, fallback to a lower speed can |
|
| occur. |
Command: | On | Return Online to Data Mode |
Values: | 0 or 1 |
|
Default: | None |
|
Description: | O0 | Exit online command mode and return to data |
|
| mode (see +++AT<CR> Escape Sequence |
|
| command). |
| O1 | Issue a retrain and return to online data mode. |
Command: | Qn | Enable/Disable Result Codes |
Values: | n = 0 or 1 | |
Default: | 0 |
|
Description: | Q0 | Enable Result Codes. |
| Q1 | Disable Result Codes. |
Command: | Sr=n | Set Register Value |
Values: | r = | |
Default: | None |
|
Description: |
| Set value of register Sr to value of n, where n is |
|
| entered in decimal format. |
Command: | Sr? | Read Register Value |
Values: | r = | |
Default: | None |
|
Description: |
| Read value of register Sr and display value in 3- |
|
| digit decimal form. |
Command: | Vn | Terse/Verbose Result Code Format |
Values: | n = 0 or 1 | |
Default: | 1 |
|
Description: | V0 | Displays Result Codes as digits (terse response). |
| V1 | Displays Result Codes as words (verbose |
|
| response). |
30
