MT3334ZDX/V Owner's Manual
Hardware/Software Confirmation
To confirm that your modem (hardware) and communications package (software) is working properly:
1.Go into terminal mode in your communications package.
2.To determine if your computer and modem are communicating properly, Enter: AT<CR> At this point your video monitor should display OK. If the characters you typed do not appear or if double characters appear, see the troubleshooting section of this chapter.
3.To confirm how your MultiModemZDX is configured, enter AT&V<cr>. What is then reported is how the MultiModemZDX is currently configured.
Figure 2-5. MultiModemZDX Configuration Confirmation
18
