MT3334ZDX/V Owner's Manual
Garbage Characters on the Monitor
•Your computer and the remote computer may be set to different word lengths, stop bits, or parities. If you have connected at
•You may be experiencing line noise. Enable error correction, if it is disabled, or hang up and call again; you may get a better connection.
•At speeds above 2400 bps, the remote modem might not use the same transmission or error correction standards as your modem. Try connecting at a slower speed or disabling error correction. (With no error correction, however, line noise can cause garbage characters.)
•Try entering the &V (View Parameters) command, making a screen print of the diagnostics listing, and checking for parameters that may be unacceptable.
26
