1 - Introduction and Description

Fax

Supports V.17, Group 3 fax communication standards, allowing it to communicate with other fax modems as well as with fax machines.

Responds to Class 1 fax commands, enabling it to exchange editable and encrypted faxes with other Windows 95 computers.

Sends and receives faxes from your computer at 14,400 bps, 9600 bps, 7200 bps, 4800 bps, 2400 bps, or 300 bps.

Voice (Model MT3334ZDXV only)

Full-duplex speakerphone support with adjustable speaker volume control. Can record and play back answering machine messages using optional microphone and speaker.

Remote/local telephone answering machine (TAM) capabilities include voice mail control, record/playback, and call screening.

Supports the TIA/EIA IS-101 AT+V voice command set.

Note: For more information on +V commands supported by the MT3334ZDXV refer to Multi-Tech's Voice +V Commands Developer's Kit (P/N 82039200). This document is available upon request.

About this Manual

This manual is divided into five chapters and three appendices. The information contained in each chapter and appendix is as follows:

Chapter 1 - Introduction and Description

Chapter 1 begins with a short product introduction and description; followed by a guide (which you are now reading) to the use of this manual.

Chapter 2 - Installation and Connection

Chapter 2 documents the procedure for connecting the MultiModemZDX to your computer and to the phone line. Details are given, supported by illustrations as a guide for installing your MultiModemZDX to the point of operation. There is also a Troubleshooting section in the event your MultiModemZDX is not operating properly.

7

Page 7
Image 7
Multi-Tech Systems owner manual About this Manual, Fax, Voice Model MT3334ZDXV only, Introduction and Description