Multi-Tech Systems MTA128ST-USB MultiModem ISDN User Guide, Figure 2-2.Mounting the Feet, Figure 2-3. MTA128ST-USBConnections

MultiModem ISDN User Guide

Assembling the MTA128ST-USB

The only assembly required is to mount the feet on the bottom of your unit (See Figure 2-2). Peel the four self-adhesive plastic feet off the backing strip and press them into the recesses on the bottom of the MTA128ST-USB.

Figure 2-2. Mounting the Feet

Connecting the MTA128ST-USB to Your System

Place the MTA128ST-USB terminal adapter in a convenient location. In a typical configuration, you will need to connect your MTA128ST-USB to your computer’s USB port, to its own power supply, to the ISDN network terminator, and to any optional analog equipment you are using (e.g., a telephone). Each cabling procedure is shown in Figure 2-3.

POWER USB PHONE ISDN

Figure 2-3. MTA128ST-USB Connections

12