MultiModemISDN User Guide

Description: Forces TA to go off-hook (to take control of the telephone line) or to go on- hook (hang up). Since the TA goes off-hook automatically when it dials, the H command is normally used only to hang up. To hang up, first escape to command mode (+++AT <cr>), then type ATH (or ATH0) <cr>.You also can include the hang-up command in the escape sequence: +++ATH <cr>.

HGo on-hook (hang up)

Command:

In

Function:

Display Product Information

Values:

n = 0, 1, 2, and 4

Default:

none

Description: Displays the following MTA128ST-USB product information.

I0 Product ID (e.g., 247)

I1 Firmware version number (e.g. 6.00)

I2 Model number (e.g., MTA128ST-USB)

I4 Date and time firmware was made

Command: O

Function: Return Online

Values: none

Default: none

Description: The O command returns the TA to online mode from online comman mode. When TA makes a data connection, it enters online data mode. TA remains in this mode until it receives an escape sequence or until the call ends. When it detects an escape sequence, the TA enters online command mode, where it can accept AT commands while retaining the online connection. To return TA to online mode from online command mode, enter ATO and press ENTER.

Command: @CONFIG

Function: Start ConfigMenu

Values: none

Default: none

Description: The @CONFIG command starts the TA’s internal configuration utility, used to customize the TA’s configuration for your application.You must enter the command while in your communication program’s terminal mode.

62