
MultiModemISDN User Guide
Numbering Plan
0Unknown
1ISDN/telephony
3Data
4Telex
8National standard
9Private
Default: 128 (disabled)
Description: Modifies the value of Octet 3 of the Calling Party Number Information Element that is sent within the SETUP message for data and POTS port (voice/modem/fax) calls. To set a specific number type and numbering plan, select an option from the Type of Number section above and add its value to the value of an option in the Numbering Plan section above. For example, a National/ISDN Calling Party Number IE would be S56=33, where 32 (National) + 1 (ISDN/telephony) = 33 (National/ISDN). If there is no Data Directory Number (for data calls) nor Voice Directory Number (for voice/modem/fax calls), no Calling Party Number IE is sent. By default S56=128, which means no Calling Party Number IE is sent.
S57 (applies to NET3 [!C0=2] switch type only) | ||
Function: | Called Party Number IE Settings | |
Unit: | decimal ASCII code | |
Range: | 128 | Disable |
| Type of Number | |
| 0 | Unknown, |
| 16 | International |
| 32 | National |
| 48 | Network specific |
| 64 | Subscriber |
| 96 | Abbreviated |
| Numbering Plan | |
| 0 | Unknown |
| 1 | ISDN/telephony |
| 3 | Data |
| 4 | Telex |
| 8 | National standard |
| 9 | Private |
Default: 128 (disabled)
Description: Modifies the value of Octet 3 of the Called Party Number Information Element that is sent within the SETUP message for a data call and within each INFORMATION message that is sent when dialing from the POTS port. To set a specific number type and numbering plan, select an option from the Type of Number section above and add its value to the value of an option in the Numbering Plan section above. For example, a National/ISDN Called Party Number IE would be S57=33, where 32 (National) + 1 (ISDN/ telephony) = 33 (National/ISDN). By default S57=128, which means no Called Party Number IE is sent.
70