MultiModemISDN User Guide

ISDN MTA128ST-USB Configuration Utility

Use the ISDN MTA128ST-USB Configuration Utility with computers running Windows 2000/98/95 operating systems only. Because it is a software utility, you can use it to create and store as many different configurations as you wish.

To Install in Windows 2000/98/95

1.When installing from disk, insert the Setup disk (provided in your MTA128ST-USB package) into drive A or B. If installing from a network location, connect to it. (Note the drive letter. You may need it if you run Setup again.)

2.Click Start Settings Control Panel.

3.Double-click the Add/Remove Programs icon.

4.For Windows 98/95 users, click Install on the Install/Uninstall tab. For Windows 2000 users, click the Add New Programs icon.

5.Follow the instructions that appear on screen.

To Use the ISDN MTA128ST-USB Configuration Utility

1.To start the utility, click Start Configuration Utility icon. The

Programs, and then double-click the ISDN MTA128ST-USB ISDN TA Configuration Wizard displays.

Select the type of Setup (e.g., Express (Existing), Configuration (e.g., EuroISDN), and then click Next >. Follow the instructions provided in each succeeding dialog box.

2.Refer to the “Network Configuration” planning sheets completed in the previous section as you configure the unit. If you have questions about choices in a dialog box, click Help.

3.When you finish configuring the MTA128ST-USB, exit the configuration utility.

38