Chapter 4 - AT Commands, S-Registers, and Result Codes

Data Call Commands

A

Answer

D

Dial

DSn

Dial Stored telephone number

&Jn

Channel Bundling

H

Hang up

In

Display product information

On

Return on-line

@Config

Start ConfigMenu

Command Implementation

Command: AT

Function:

Attention Code

Values:

n/a

Default:

n/a

Description: The attention code precedes all command strings except the A/ command and escape codes.

Command: RETURN

Function: Command Execution

Default: n/a

Values: n/a

Description: Press RETURN (ENTER) to execute a command. In command examples,

 

RETURN frequently is abbreviated <cr>.

Command: +++AT<cr>

Function:

In-Band Escape Code

Values:

ASCII

Default:

+ (43)

Description: Makes TA enter command mode (without disconnecting the call) when it is on-line with a remote device. Default escape code is three + characters followed by the letters AT, up to 80 command characters and a RETURN (press Enter). The TA escapes to command mode, executes any commands in the string, and then remains in command mode. Use S2= command to change the escape character.

Command: <break>AT<cr>

Function: Out-of-Band Escape Code

Values: n/a

Default: n/a

Description: Places TA in command mode while remaining on-line. Enter a break signal, the letters AT, up to 80 command characters, and a RETURN (press Enter).

49