MultiModemISDN User Guide

Command:

&Wn

Function:

Store Active Profile

Values:

n = 0 or 1

Default:

&W1 (Use factory default profile)

Description: Stores your active profile, or configuration, in memory, so you won't lose custom settings when you turn off the TA or reset it.

&W0 Stores all current AT command and S-register values in nonvolatile random

 

access memory (NVRAM) and configures the TA so it reads your custom

 

settings in NVRAM when the TA is turned on or when it is reset with the Z

 

icommand. (The &F reset command continues to read factory default settings in

 

ROM.)

 

&W1 Erases your custom settings in NVRAM the next time the TA is

 

turned off or reset, causing the TA to read factory default settings in

 

ROM whenever it is turned on or reset.

Command: &Zn=x

Function:

Store Telephone Number

Values:

n = 0–9; x = dial string

Default:

n/a

Description: The &Z= command lets you store a telephone number in a memory register for faster dialing. To store a number, type &Z, the register number (0–9) where you want to store store the number, the = character, and the dialing string that you want stored; then press ENTER. The dialing string can have up to 25 characters. To read a stored number, type AT&Zn? (e.g., AT&Z4?) where n is the number of the register you want to read. To display a list of all numbers stored in memory, type ATL and press RETURN:

014082345678

117635551212

214089876543

46313551

64258513

817636313550

912138880123

Command:

$Dn

Function:

Persistent DTR Dialing

Values:

n = 0, or 1

Default:

$D0 (Disabled)

Description: Enables or disables persistent DTR dialing (PDD). PDD causes the terminal

 

adapter to automatically and continuously redial stored telephone number 0

 

when the port has no active calls and DTR is high.

 

$D0

Disables PDD.

 

$D1

Enables PDD.

Command: $MBn

 

Function:

V.110 Network Rate*

Values:

n = 600, 1200, 2400, 4800, 9600, 19200, 38400

Default:

$MB38400

Description: If S77=1, then the network rate of the V.110 connection will match that of $MB (S76).

If a V.110 call is received and S77=1, then the incoming V.110 network rate must match $MB (S76) or the connection will fail. If S77=2 and a V.110 call is originated, then the network rate will match that of $MB (S76). If S77=2 and a V.110 call is received, then the setting of $MB (S76) will have no effect on the network rate of that call (see S77 for a

60