MultiVOIP Quick Start Guide
12
Installing Your MultiVOIP 400/800
The following installation procedures do not provide every
screen or option in the process of installing the MultiVOIP 400/
800 software. It is assumed that a technical person with a
thorough knowledge of Windows and the software loading
process is doing the installation. Once you have installed the
software, you will be instructed on how to configure your
MultiVOIP 400/800, and finally, on how to deploy your
MultiVOIP 400/800. Additional information on the MultiVOIP
400/800 software is provided in the Help.
Note: The phonebook directory configuration process is
different depending on whether or not you have an enabled
H.323 Gatekeeper resident in your network. The “Configuring
Your MultiVOIP 400/800” section will explain these differences.
The MultiVOIP 400/800 software and User Guide are
contained on the MultiVOIP 400/800 CD. The CD is auto-
detectable, so when you insert it into your CD ROM drive it will
start up automatically. When you have finished configuring
your MultiVOIP 400/800, you can view and print the User
Guide by clicking the Install Manuals icon.
CAUTION: If you are installing a MultiVOIP 400/800 behind a
firewall, the Firewall must support H.323. Refer to your
Firewall user documentation to enable H.323 support.
1. Make certain that your MultiVOIP 400/800 has been
properly cabled and that it is powered on.
2. Insert the MultiVOIP 400/800 CD into your CD-ROM drive.
The CD should start automatically. It may take 10 to 20
seconds for the MultiTech CD installation window to
display.