17
Configuring the MultiVOIP
Configuring Your MultiVOIP 400/800
The following steps provide instructions for configuring your
MultiVOIP 400/800. The configuration sequence includes IP
Protocol default setup, Channel setup, and Phone Directory
Database setup. The Phone Directory Database setup is
configured differently depending on whether or not the
Gatekeeper function is available and enabled on the Phone
Directory Database dialog box (see Step 26).
11. The IP Protocol Default Setup dialog box displays.
The default Frame Type is TYPE_II. If this does not match
your IP network, change the Frame Type by selecting
SNAP from the Frame Type list. The available Frame
T ype choices are TYPE_II and SNAP.
12. In the Ethernet group, enter the IP Address, Subnet
Mask, and Gateway Address unique to your IP LAN. The
IP address is the unique LAN IP address that is assigned
to the MultiVOIP 400/800, and the Gateway address is the
IP address of the device connecting your MultiVOIP 400/
800 to the Internet.
Click OK when you are finished.