7
Introduction
this is done, the Phone Directory Database option is set to
Slave, and the IP address of the Master MultiVOIP 400/800 is
entered. Once all Slave units are configured, the process
moves on to the “Deploying the VOIP Network” section.
Deploying the VOIP Network
The final phase of the installation is deployment of the
network. When the remote MultiVOIP 400/800s are sent to
their remote sites, the remote site administrators need only
connect the units to their LAN and telephone equipment. A full
Phone Directory Database (supplied by the Master MultiVOIP
400/800 Proprietary Phonebook will be loaded into their units
within minutes of being connected and powered up. For
remote VOIPs that were configured with the Gatekeeper
option enabled, each MultiVOIP 400/800 will be registered with
the Gatekeeper (the Gatekeeper phonebook directory is NOT
downloaded to the remote units).
The final task of the VOIP administrator or the Gatekeeper
administrator is to develop the VOIP Dialing Directory based
on the appropriate phone directory database (the Proprietary
phonebook database or the Gatekeeper phonebook
database).