59
Deploying the VOIP Network
Deploying the VOIP Network
For a proprietary phone directory database, the VOIP
administrator can deploy the pre-configured slave MultiVOIP
400/800s to their remote sites. The remote site administrators
need only connect power to the pre-configured MultiVOIP 400/
800, connect the MultiVOIP 400/800 to their Ethernet LAN and
predefined telephone equipment, and then wait for the phone
directory database to be downloaded.
With the Gatekeeper option enabled on the Phone Directory
Database dialog box, all MultiVOIP 400/800s are configured
as “Master” and cannot be downloaded. In this case, each
MultiVOIP 400/800 Phone Book will be programmed with
phone numbers for its own channels. These phone numbers
are remotely registered with the H.323 Gatekeeper. See the
“Registering with a Gatekeeper Phone Directory” section for
more information.
Remote Site Administrator
The following steps are for MultiVOIP 400/800 H.323
endpoints. For non-MultiVOIP 400/800 H.323 endpoints, refer
to the appropriate installation documentation.
1. Unpack your MultiVOIP 400/800.
2. Connect one end of the power supply to a live AC outlet
and connect the other end to the Power connection on
your MultiVOIP 400/800 (See Figure 5).