MultiVOIP Quick Start Guide
18
13. The Channel Setup dialog box displays. The four tabs in
this dialog box define the channel interface, voice/fax
parameters, billing, miscellaneous, and regional telephone
parameters for each channel.
Configure each channel for the type of interface you are
using. Channel 1 is selected by default in the Select
Channel list. To change the channel number, select the
channel you want to configure from the list.
Note: Feature options are enabled or unavailable
depending on the selected interface type. The one option
available for all interface types is the Inter Digit Time
option. This option defines the maximum amount of time
that the unit will wait before mapping the dialed digits to an
entry in the Phone Directory Database. If too much time
elapses between digits, and the wrong numbers are
mapped, you will hear a rapid busy signal. If this happens,
hang up and dial again. The default setting is 2 seconds.