CONTROLS AND INDICATORS

 

 

 

2

1

 

 

 

6

 

4

5

 

13

 

12

 

 

 

4

 

 

 

 

 

8

 

 

35

35

7

3

11

10

9

9

15

14

16

Figure 2. HHXG5 Controls and Indicators (Front)

1.Seat — Place for operator to sit. Engine will not start unless operator is seated. Seat is adjustable, fore and aft for operator comfort.

2.Steering Control Joystick (right side) — Allows the unit to move in either a forward, reverse left or right direction. See page 24 for additional Information.

3.Front Guard — Remove this Guard Cover to access left side of engine and other internal components.

4.Pitch Control — Adjusts the blade pitch separately for each side of the trowel.

5.Hour Meter — Indicates number of hours machine has been in use or hours engine was run.

6.Steering Control Joystick (left side) — Allows the unit to move in either a forward, reverse left or right direction. See Page 24 for additional Information.

7.Light Switch — When activated, turns on four halogen lights. Lights offer better visibility when working indoors.

8.Ignition Switch — With key inserted turn clockwise to start engine.

9.Lights — 12V Halogen, 4 fore and 2 aft.

10.Right Side Guard — Remove to access Radiator and to allow Right Clamshell to open for Service.

11.Left Side Guard — Remove to access Battery and to allow Left Clamshell to open for Service.

12.Left Side Clamshell — Open to allow access for service and maintenance.

13.Right Side Clamshell — Open to allow access for service and maintenance.

14.By-Pass Indicator — Sight glass located in-line and just above the Hydraulic By-Pass Filter. System in a By-Pass condition when indicator in the red area.

15.Hydraulic By-Pass Filter — Filters contaminants from hydraulic system during a By-Pass condition.

16.Magnetic Drain Plug — Remove to drain hydraulic oil from hydraulic system.

HHXG5 RIDE-ON TROWEL • operation manual — rev. #1 (10/25/10) — page 17

Page 17
Image 17
Multiquip operation manual HHXG5 Controls and Indicators Front