Multiquip HHXG5 operation manual Steering Pressure Adjustment, Steering Pressure Check

mAINTENANCE

Steering Pressure Adjustment

	2000	3000
1000	150	200	4000
	100	250
	50	300

bar

psi 5000

WIKA

Figure 48. Steering Pressure Check

The left steering valve's factory setting is 230 PSI, however some operators may prefer a more responsive steering (higher pressure required; 300 PSI maximum) and some operators may prefer a "softer feel" (lower pressure required; not less than150 PSI)

Figure 49. Steering Pressure Adjustement

Remember, the trowel will need to be kept stationary during "run-up" while checking the pressure.

1. Remove front grille guard.

2. Loosen jam nut on pilot relief valve (Figure 49).

3. Use allen wrench to adjust the steering pressure to the desired setting. (between 150 and 300 PSI) See Checking Steering Pressure procedures.

4. Retighten jam nut.

5. Remove pressure guage and reinstall access grilles.

page 44 — HHXg5 RIDE-ON TROWEL • operation manual — rev. #1 (10/25/10)