mAINTENANCE (new style clutch)

2. Disconnect the left-side CV Axle from the left-side gearbox and the lower drive pulley coupler. See Figure 30.

UPPER DRIVE

PULLEY/CLUTCH

 

LOWER

 

DRIVE

 

PULLEY

CVT

CV AXLE

 

BELT

GEARBOX

 

COUPLER

 

COUPLER

LEFT-SIDE

GEARBOX

Figure 30. Remove Left-Side CV Axle

3.If the belt is not being reused (recommended), CUT the drive belt. Ensure all belt remnants are removed from the pulleys.

installing Drive Belt

1.Place new CVT belt over the lower pulley. Squeeze the belt (Figure 31) and pull the belt upwards and towards the rear of the trowel. This will spread open the faces

of the lower drive pulley.

CVT BELT (P/N 23365)

PULL UPWARDS

AND TOWARDS

REAR OF TROWEL

FIXED

FACE

MOVEABLE LOWER

FACE PULLEY

Figure 31. Holding Lower Pulley Open

2.Place free end of CVT belt into upper pulley grooves See Figure 32.

CLUTCH

UPPER

PULLEY

LOWER

PULLEY

Figure 32. Upper Pulley Belt Installation

3.Reconnect left-side CV Axle Assembly. to the left side gearbox and lower drive pulley coupler. See Figure 30.

HHXG5 RIDE-ON TROWEL • operation manual — rev. #1 (10/25/10) — page 35

Page 35
Image 35
Multiquip HHXG5 operation manual Installing Drive Belt, Lower drive pulley