Multiquip manual LS400/LS500 PUMP - ENGINE COMPONENTS, Initial Servicing

LS400/LS500 PUMP — ENGINE COMPONENTS

Figure 7. Deutz F4L2011F/BF4L2011 Diesel Engine Components

INITIAL SERVICING

The engine (Figure 7) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturer's engine manual for instructions and details of operation and servicing.

1. Fuel Filter – Service the fuel filter as recommended in the maintenance section of this manual.

2.Oil Filter – Prevents dirt and other debris from entering the engine. Service the oil filter as recommended in the maintenance section of this manual.

3. Crankcase Drain Plug – Remove this plug to drain engine oil from the engine crankcase. For best results drain engine oil when oil is warm.

4.Dip Stick – Remove dipstick to determine if the engine oil level is low. If low add oil as specified in Table 4.

5. V-Belt Cover – Remove this cover to gain access to theV-belt.When replacingV-belt, use only recommended type V-belt.

6. Alternator – Provides power to the electrical system. Replace with only manufacturers recommended replacement parts.

7.Air Filter/Cover – Prevents dirt and other debris from entering the fuel system. Release the latches on the side of the air filter cover to gain access to filter element.

Operating the engine without an air filter, with a damaged air filter, or a filter in need of replacement will allow dirt to enter the engine, causing rapid engine wear.

8.Oil Filler Port/Cap – Remove this cap to add engine oil to the crankcase. Fill with recommended type of oil as specified in the maintenance section of this manual.

9.Starter/Solenoid – This engine uses a 12 VDC , 2.7kW (3.7 HP) starter motor with solenoid.

PAGE 22 — MAYCO LS400/LS500 PUMP — OPERATION AND PARTS MANUAL — REV. #6 (09/19/11)