inspection

b.Locate the key slot A on each female connector as shown in Figure 5.

MALE CONNECTOR

FEMALE CONNECTOR

KEY SLOT A

KEY TAB B

 

Figure 5. Female and Male Connector

c.On the corresponding male connector, locate the key tab B as shown in Figure 5.

d.Align the key tab B on the male connector with the key slot A on the female connector and press together until seated.

e.Secure the connector by screwing the knurled locking nut of the male connector to the threaded portion of the female connector to ensure good

contact between the two connectors.

MLT25 SERIES LIGHT TOWER • operation manual — rev. #0 (11/28/12) — page 17

Page 17
Image 17
Multiquip MLT25 operation manual Contact between the two connectors, Female and Male Connector