FRONT PANEL (710FX2)
From Top to Left: |
|
RJ45 Ports | Auto Sensing 10/100 |
Fiber Ports | 100 |
| LED lights when Power is supplied to the unit |
NOTE: The RJ45 data port has two LEDs located on each connector. The left LED indicates LINK status, and the right LED indicates ACTIVITY.
LEDs: The table below describes the operating modes:
LED | Color | Description | |
| GREEN | Power is ON | |
|
|
| |
| RED | Power is ON and a fault condition exists | |
|
|
| |
| OFF | Power is OFF | |
|
|
| |
| GREEN | 10/100Mb Link between ports | |
LNK |
|
| |
OFF | No Link between ports | ||
| |||
|
|
| |
ACT | GREEN | Data is active between ports | |
|
| ||
OFF | Data is inactive between ports | ||
| |||
|
|
|
(Revised | Page 13 of 159 |
