N-Tron 710FX2 user manual CLI Commands, ―?‖ Help

CLI Commands

―?‖ (Help)

Command Name		―?‖
Description		Show a list of all commands or get help on a specific command.
		Without cmd, this command will list all the available commands.
		If cmd is specified and if it matches a specific command, the usage of the command will
		be displayed; otherwise, if cmd matches the prefix of a command, the name of the
		command will be listed.
		If ? is preceded by another ?, the usage and description of this command will be
		displayed.
Syntax		? [cmd]
Parameters		cmd
		The command for which to get help.
Examples		N-TRON/Admin> ?
		N-TRON/Admin>		?
		Command	Description
	-------		-----------
	?		Show	a list of all commands or get help on a
		specific	command.
		Logout	Log out		of console interface.
		Arl	Show, Add or Delete Arl Entries.
		CfgDev	Perform		configuration device operations.
		Config	Save	or	reset configuration settings.
		Cip	Show	or	set CIP configuration.
		Idle	Show	or	clear idle task statistics.
		Igmp	Show	or	set IGMP configuration.
		Mirror	Show	or	set the Mirror configuration.
		NRing	Show	or	set N-Ring configuration.
		NView	Show	or	set N-View configuration.
		Ping	Ping	a host.
		Port	Show	or	set Port configuration.
		Reset	Reset switch.
		Shell	Start a		file command shell.
		Snmp	Show	or	set SNMP configuration.
		SysErr	Show	or	clear the last system error.
		SysInfo	Show	system information.
		SysIp	Set system ip configuration mode, IP address,
		subnet mask, and			gateway.
		System	Show	or	set System configuration.
		Debug	Set/Get		debug trace level for a given module.
		Use "cmd	?" to get help about a specific command.

N-TRON/Admin>

N-TRON/Admin> abcd ?

Unknown Command: "abcd"

Type "?" for a list of available commands.

N-TRON/Admin> logout ?

Logout

Log out of console interface.

SYNTAX:

Logout

N-TRON/Admin> ? pi

(Revised 2010-9-27) Page 132 of 159