N-Tron 710FX2 user manual Show or Set N-Ring Configuration, Nring, Ports setid, Nview

CLI Commands, Continued…

Show or Set N-Ring Configuration

Command Name	Nring
Description	Show or set N-Ring configuration. If no parameters are specified, this command will
	show the N-Ring configuration (same as -show parameter).
Syntax	nring [-show] [-mode d a m] [-ports set_id]
Parameters	-show
		Show configuration.
	-mode
		Set the N-Ring mode.
		d = disabled, a = auto member, m = manager
	-ports set_id
		Set the ring ports for N-Ring manager mode.
		Specify port set identifier or use ‗?‘ to list available port sets.
Examples	N-TRON/Admin> nring –show
	N-Ring Mode		: Auto Member
	Aging Time		: 20
	N-TRON/Admin> nring –ports ?
	ID	Port Set
	--	--------
	1	TX1 / TX2
	2	FX1 / FX2
	N-TRON/Admin> nring –mode m –ports 2
	Do you Want to Save Changes and Restart the System Now [y/n]?
	…
NOTES
Show or Set N-View Configuration
Command Name	Nview
Description	Show or set N-View configuration. If no parameters are specified, this command will
	show the N-View configuration (same as -show parameter).
Syntax	nview [-show] [-status state]
Parameters	-show
		Show configuration.
	-status state
		Set the N-View status to e(nabled) or d(isabled).
Examples	N-TRON/Admin> nview –show
	N-View Status		: Enabled
	N-View Interval : 5
	N-TRON/Admin> nview –status disabled
	N-View Status		: Disabled
	N-View Interval : 5
	Changes have been made that have not been saved.
	…
NOTES

(Revised 2010-9-27) Page 139 of 159