NAD L56 Enjoying Dolby PRO Logic Surround Sound, With a Receiver Equipped with Dolby Digital

Installation

CONNECTING TO OPTIONAL AUDIO SYSTEM

ENJOYING DOLBY PRO LOGIC SURROUND SOUND

DOLBY PRO LOGIC SURROUND

You can still enjoy the excitement of Surround Sound even if your A/V receiver does not offer Dolby Digital (AC-3) decoding. If your A/V receiver has a Dolby Pro Logic decoder, refer to the following connection diagram.

Connect one or two rear speakers. The output sound from the rear speakers will be monaural even if you connect two rear speakers.

To Video Out L76 Rear

Video Cable

Connection example To Video Input

Amplifier equipped with

Dolby Pro Logic Surround

L76 Receiver

Front

speaker

(Left)

Rear speaker (Left)

To MIXED Audio Out

Audio Cable

To Audio Input

	Front
Centre	speaker
	(Right)
Speaker
	Rear speaker (Right)

GB

WITH A RECEIVER EQUIPPED WITH DOLBY DIGITAL

Connect the equipment the same way as described in “Enjoying Dolby Digital (AC-3) Sound” on the previous page. Refer to that receiver’s owner’s manual and set the receiver so you can enjoy Dolby Pro Logic Surround sound..

WARNING

Do not set the Digital Audio Output of this DVD player to “Dolby Digital” unless you are connecting the DIGITAL AUDIO jack of this DVD player to an AV decoder that has the Dolby Digital decoding function. High volume sound may damage your hearing as well as the speakers (Refer to “Selecting Digital Audio Output” on page 37).

21