Each DVD disc has a variety of audio output options. Set the player’s Digital Audio Output according to the type of audio system you use.
1At the SETUP screen, press 
to select Digital Audio Output and press 
2 Press 
to select the desired output and press ENTER.
DOLBY DIGITAL/PCM
Select “DOLBY DIGITAL/PCM”if an active digital output is supplied to the Dolby Digital decoder, (or an amplifier or other equipment with a Dolby Digital decoder).
STREAM/PCM
Select “Stream/PCM” if an active digital output is supplied to an amplifier or other equipment with DTS decoder, Dolby Digital decoder and MPEG decoder.
PCM
Select “PCM” if an active digital output is supplied to an amplifier or other equipment with linear PCM only (or MD recorder or DAT deck).
NOTES
•When you are not using the player’s digital audio output, don’t select any of the options.
•If an active digital audio output signal is supplied to an receiver or other equipment without a corresponding digital decoding capability, a very loud noise may be produced which could permanently damage the speakers.
•The DTS DVD disc sound is played back only when the DVD player is connected to a receiver with a DTS decoder.
Initial Settings
SELECTING DIGITAL AUDIO OUT
Playback Disc |
| OUTPUT |
|
|
| Stream / PCM | Dolby Digital / | PCM only |
|
|
| PCM |
|
|
|
|
|
|
|
96 kHz Linear | PCM | PCM | PCM |
|
PCM DVD |
|
|
|
|
|
|
|
|
|
DTS DVD | DTS Bit Stream | No Output | Audio Output |
|
|
|
|
| GB |
Dolby Digital DVD | Dolby Digital Bit | Dolby Digital Bit | PCM | |
| Stream | Stream |
| |
|
|
| ||
|
|
|
|
|
MPEG DVD | MPEG Bit Stream | PCM | PCM |
|
|
|
|
|
|
Audio CD | PCM | PCM | PCM |
|
|
|
|
|
|
DTS Audio CD | DTS Bit Stream | DTS Bit Stream | DTS Bit Stream |
|
|
|
|
|
|
43
