Napoleon Fireplaces GDS 28-P 14FINISHING, Door Closing And Opening, Log Placement Instructions

Models: GDS 28-N GDS 28-P GS 28-P GS 28-N

1 24
Download 24 pages 50.96 Kb
Page 14
Image 14
14FINISHING
FIGURES 31

14FINISHING

DOOR CLOSING AND OPENING

When installing the fire viewing door, a simple procedure must be followed in order to not damage the door. First open both side doors fully. Insert the pins on the door left side into the hinge bushings. Swing the door closed and engage the latches into the catch slots. Push the latch han- dles backwards to secure the closed door. It may be nec- essary to lift the door when securing it to ensure that it is in a horizontal position.

To open the door, repeat in reverse order.

HINGE

CATCH

PIN

SLOT

 

 

DOOR

BUSHING

LATCH

 

FIGURES 30

LOG PLACEMENT INSTRUCTIONS

PHAZERTM logs, glowing embers and charcoal embers ex- clusive to Napoleon Fireplaces, glow when exposed to di- rect flame and provide a unique and realistic glowing effect that is different in every installation. Use only certified PHAZERTM logs, glowing embers and charcoal embers available from your Napoleon / Wolf Steel Ltd. dealer.

Positioning the logs improperly will cause flame

impingement and carboning.

Place the back log into the firebox pushing it as close to the firebox wall as possible and centered onto the log support pan.

FRONT LOG

STUDS

1SCREEN DOOR CLOSING AND OPENING

2REAR LOG

Place the front log on the ember screen lining up the studs with the holes on the bottom of the log.

3FRONT LOG

Set the two crossover logs into the pockets provided on both the front and rear logs., as shown.

RIGHT LOG

4

Tear the glowing embers into pieces and place onto the screen beneath the front log. Care should be taken to shred the embers into thin, small irregular pieces as only the exposed edges of the fibre hairs will glow when exposed to direct flame; however care should be taken to not block the burner ports. Blocked ports can cause an incorrect flame pattern, carbon deposits and delayed ignition.

GLOWING

EMBERS

5

Randomly place the charcoal embers along the front of the support pan and some onto the screen in a realistic man- ner. Fine dust found in the bottom of the bag should not be used. Do not place any embers on the burner.

LEFT LOG

6

CHARCOAL EMBERS

Log colours may vary. During the initial use of the fireplace, the colours will become more uniform as colour pigments burn in during the heat activated curing process.

W415-0153 / A / 10.29.01

Page 14
Image 14
Napoleon Fireplaces GDS 28-P 14FINISHING, Door Closing And Opening, Log Placement Instructions, Figures, Glowing Embers