Chapter 3 Ada Language Reference
AutoCode Reference 3-16 ni.com
Ada Fixed-Point Arithmetic
This section describes the implementation of fixed-point arithmetic in
AutoCode/Ada. It is assumed that you are familiar with the Ada
programming language.
Note The SystemBuild User Guide has a fixed-point arithmetic chapter that explains the
basics of fixed-point arithmetic and the use of fixed-point arithmetic in SystemBuild
models.

How to Generate Real-Time Code

Using AutoCode, you can generate Ada high-level language code. Refer to
the Template Programming Language User Guide or to Chapter 2, Using
AutoCode, of the AutoCode User Guide for additional information. To
generate code to run on your local host, you can generate code from one of
the following:
• SystemBuild, which lets you automatically generate a real-time file
(.rtf) and then source code from a model, using a Graphical User
Interface. This is the recommended method of generating code to run
on your local host.
• Xmath, which lets you automatically generate an .rtf file and then
source code from a model, using an Xmath command.
• The operating system prompt, which lets you generate source code
from an already-existing .rtf file, using the autostar command
from the operating system prompt.

Fixed-Point AutoCode/Ada Architecture

This section describes the architecture of Fixed-Point AutoCode/Ada.
Consult an Ada language reference manual if you are not familiar with any
of the terms in this section. The basis for this architecture is the use of the
fixed-point type mechanism provided in Ada. This basis enables the use of
generic functions to implement the functionality of standard operations,
such as addition and subtraction. Overloaded operators are created as
instances of the generic functions for only those combinations of
fixed-point data types used in the model. The use of overloaded operators
maximizes code readability.