Navini Networks Ripwave manual Indicator Light on the HD-EBP

Navini Networks, Inc. Ripwave MX Modem User Guide

Connecting and Disconnecting the HD-EBP, continued

Step Action Illustration

6.Plug the battery pack’s pig-tail cord into the power slot on the Modem.

7.To remove the battery pack from the Modem, unplug the pig-tail cord. Depress the front button on the battery pack. Lift the Modem off of the battery pack.

The Indicator Light on the HD-EBP

The HD-EBP has one indicator light that resides on the back end of the unit near the pig-tail cord. This light has four states associated with it. The states are described in the following table.

Battery	Battery	Modem	Modem	Comments
LED	Charger	Connected	On/Off
	Connected	& Switched	Button is
		On	Lit
Green	Yes	Not	Not	Battery fully charged.
		applicable	applicable
Amber	Yes	Not	Not	Battery charging.
		applicable	applicable
Off	No	Yes	Yes	Normal. Battery is
				supplying power to
				Modem. No power is
				wasted on the battery
				LED.
Red	No	Yes	Yes	Battery is supplying
				power to Modem. Battery
				is low. 5% charge left.1
Off	No	Yes	No	Battery is out of power.
Off	No	No	No	Battery LED is off.
				Status of battery is
				unknown.

29

060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)