NEC GT2000, GT2000R user manual Remote Control Features

Remote Control Features

You can use your remote control with the cable or wireless to operate your MultiSync GT2000/GT2000R LCD Projector.

If you want to use your remote control with the cable, connect one end of the cable to the jack on the remote control and the other end to the Terminal Panel.

1	Power ON and OFF	4
If your main power switch on the front is turned on, you can
use this button to turn your projector on and off.
2	Menu
Press this button to call up the On-Screen Menu so you can
adjust and set the image.
To return to the main menu from a submenu or to turn off the
main menu, press this button again.
3	Enter
This button activates items selected from the on-screen menu.
4	Cursor
Use this control to select items from the on-screen menu.

POWER

OFFON

MENU

- + ENTER

RGB1 RGB2 VIDEO/S-VIDEO

ABC DEF GHI

1 2 3

JKL MNO PQR

4 5 6

STU VWX YZ?

7 8 9

,. LOAD CLEAR

0

1

2

3

5

6

7

8

5 Input

Select your input source by pressing the RGB1, RGB2, or VIDEO/S-VIDEO button. The VIDEO/S-VIDEO button toggles between VIDEO and S-VIDEO. Also you can select RGB or YCbCr directly by pressing CTL and RGB1(or RGB2) buttons while you are in the RGB mode.

6 Number

Use one of these buttons to specify the memory location or enter to name a signal during input registration.

7 Clear

Press this button to clear any adjustments in progress.

CONTRAST BRIGHT VOLUME

Adr.

SETUP NORMAL DISPLAY

MUTE

PICTURE AUDIO EXPAND

FOCUS	ZOOM
+	W
-	T

9

8 Load

Press any number button and then this button to activate set- tings you have stored previously from 01 to 100 of the memory list.

9 Volume (Address with CTL)

This adjusts the volume of the built-in speaker.

Use the Volume(-) with the CTL button to display the Remote Control Unit Address on screen to specify the remote control address.

KEYSTONE

CTL

MAGNIFY/REDUCE

E-13