NEC GT2000, GT2000R Sync Signal Termination Setting [Sync Termination], Selecting the Projectors Projection Method [Pro- jection]

E-39
Sync Termination
75Ω
Hi-Z
Projection
Front Floor
Rear Ceiling
Rear Floor
Front Ceiling
Sync Signal Termination Setting
[Sync Termination]
This sets the impedance of the RGB/YCbCr Input 1 connector.
This function sets whether or not the unit will accommodate a 75
ohm output (specification) impedance of the video or personal
computer equipment.
1. Select [Settings Menu] → [Sync Termination] from the main
menu.
2. Press the cursor ▲/▼ button and select the termination resistance
value, then press the ENTER button to set.
75 ohms........................... When the impedance of the out-
put connector of the connected
equipment is 75 ohm.
High Impedance (Hi-Z)..... When the impedance of the out-
put connector of the connected
equipment is not 75 ohm.
To turn off the on-screen menu display, press the MENU button.
The display will return to the main menu. Press the MENU button
again to turn off the on-screen menu.
Selecting the Projector’s Projection Method [Pro-
jection]
This selection of the projection method is made to suit the usage
conditions.
Model GT2000 is designed for front projection and model
GT2000R is designed for rear projection.
1. Select [Settings Menu] → [Projection] from the main menu.
2. Press the cursor ▲/▼ button and select the target projection, then
press the ENTER button to set.
Front floor ..............When the projector is placed on a table
and projects from the front
Rear ceiling............ When the projector is suspended from
the ceiling and projects from the rear
Rear floor............... When the projector is placed on a table
and projects from the rear
Front ceiling ...........When the projector is suspended from
the ceiling and projects from the front