E-10
MENU
SELECT
ENTER
STATUS
ZOOM FOCUS
POWER
ON / OFF
-
+
-
+
-
+
Top Features
1 Power Button
Use this button to turn the power on and off when the Main
Power Switch is on and the LCD projector is in standby.
To turn off the projector, press and hold this button for at
least 2 seconds.
2 Menu Button
Displays the on- screen menu. A press of this button while
the on-screen menu is displayed will move back to the
previous menu step.
3 Select (▲▼§ ©) / (+)(–) Buttons
Select: After you press the “Menu” button, use the ▲ or
▼ button to select the menu item you wish to
adjust.
(+)(–): Use these buttons while you' re in the adjustment
mode to change the level of a selected menu item.
These buttons are also used to set an item in the
other menus.
4 Enter Button
Executes your menu selection.
5 (+) (–) Zoom Buttons
Press the (+) button to make the image larger; press (–) to
make the image smaller. (This feature is not available on
GT2000R.)
6 (+) (–) Focus Buttons
Press the (+) or (–) buttons to focus an image. (This feature is
not available on GT2000R.)
7 Power Indicator
When this indicator is green, the LCD projector is on; when
the indicator is amber, it is in standby mode.
8 Status Indicator
When this is lit red continually, it's warning you that the
projection lamp has exceed 2000 hours of service. After this
light appears, it is advisable to replace the projection lamp as
soon as possible.(See page E-73)
In addition the message "LAMP USAGE XX HOURS"
appears continually when the on-screen menu is not dis-
played.
If this light blinks red rapidly, it indicates that either the lamp
cover or filter cover is not attached properly. See the Status
Light Messages on page E-77 for more details.
When the GT2000/GT2000R is used with the ISS-6020
switcher in bundled operation, this indicator lights green.
The green light blinks when the ISS-6020 Switcher is not
connected with the projector correctly.
2
3
4
6
5
1
8
7
(▲▼§ ©)
MENU
SELECT
ZOOMFOCUS
STATUS
POWER
ON / OFF
ENTER