5.Adjust the Screen Size and then Adjust the Focus

When the projector is set up permanently, there is no need to make the usual adjustments.

(The Zoom and Focus buttons do not function on GT2000R.) A)Press the ZOOM W/T button and adjust the screen size. B) Press the FOCUS +/- button and adjust the focus.

FOCUS

ZOOM

+

W

-

T

6.Adjust the Screen and Picture (Only When Required)

When the screen is not displayed properly, adjust the screen. When the tint of the picture or some other attribute is not correct, adjust the picture. See "Adjusting the Screen" on Page E-49 and "Adjusting the Picture" on Page E-44.

*When the input signal is selected with the user memory or the channel memory and the auto memory save function is set to [On], the adjustment data is overwritten.

See "Storing the Adjustment Data" on Page E-59 for information about registering the input signal and adjust- ment data that are currently being projected.

NOTE: Selecting the Slot Directly When the ISS-6020 Is Connected

When the ISS-6020 switcher is connected, the slot (channel) of the switcher can be directly specified. (Valid when the on- screen menu is not displayed)

When one switcher is connected

Enter the channel number with the number button of the remote control, then press the ENTER button.

When two or more switchers are connected

Enter the two-digit channel number with the number buttons of the remote control, then press the ENTER button.

See "Selecting the Various Items and Switchers" on Page E- 58 for information about master switcher and slave switcher number specification.

7.Switch Off the Power

<Remote control operation>

A) Press the POWER OFF button.

The STATUS indicator will flash in green for 1 minute (and will be displayed while the cooling fan is turning).

The color of the POWER indicator will change to orange (indicating the standby mode).

OFF

POWER

STATUS

ON

POWER

 

 

ON/ OFF

<Main unit operation>

B)Press the POWER button for at least 2 seconds. The "Power Off" message will be displayed.

*The cooling fan will continue to turn for about 1 minute after the power has been switched off. During this period, it will not be possible to switch on the power again.

8.Switch Off the Main Power

Press the "0" side of the POWER switch located on the front of the main unit.

 

 

STATUS

(OFF)

(ON)

POWER

 

 

ON/ OFF

Also switch off the power to the equipment that is connected to the projector.

Note: Do not switch off the main power before the fan has stopped. It will cause damage.

On-screen Input Selection

Input selection is also permitted with the on-screen menu.

1. Press the MENU button to display the main menu.

Main Menu

Picture

Alignment

Memory

Switcher

Display Menu

Settings Menu

Source

2.Select [Source] of the main menu and press the ENTER button. The source selection display will appear.

3.Press the cursor /button and select the target input connector (source), then press the ENTER button to set.

Source

RGB1

RGB2

Video

S-Video

E-35

Page 35
Image 35
NEC GT2000, GT2000R user manual On-screen Input Selection, Adjust the Screen Size and then Adjust the Focus

GT2000, GT2000R specifications

The NEC GT2000 and GT2000R are renowned projectors that have established themselves in the realm of high-performance visual equipment, catering primarily to the needs of businesses and educational institutions. These projectors are celebrated for their exceptional image quality, versatility, and advanced features, making them a popular choice among users seeking reliability and performance.

One of the primary features of the GT2000 series is its high brightness capability. With a brightness of up to 2,500 ANSI lumens, these projectors can deliver clear and vibrant images even in well-lit environments, ensuring that presentations and lectures maintain their visual integrity regardless of ambient light conditions. This makes them ideal for large conference rooms and classrooms where visibility is crucial.

The GT2000 series also boasts impressive resolution specifications. The GT2000 offers a native resolution of XGA (1024x768 pixels), while the GT2000R enhances this to a WXGA (1280x800 pixels), providing a wider aspect ratio and higher detail for images. This improved resolution is particularly beneficial for displaying detailed graphics, charts, and videos, making them suitable for a variety of presentation types.

In terms of connectivity, the GT2000 and GT2000R projectors are equipped with multiple input options including VGA, composite video, and audio inputs. This versatility allows for seamless integration with various devices, such as laptops, DVD players, and even mobile devices, further enhancing their usability in different settings.

Another noteworthy characteristic of the GT2000 series is its advanced color reproduction technology. NEC employs a 3LCD technology in these projectors, which ensures vibrant colors and deep blacks, resulting in images that are both engaging and lifelike. This technology minimizes the possibility of color distortion, offering consistent and accurate color performance.

Users will also appreciate the long lamp life offered by the GT2000 and GT2000R, with lamps typically lasting up to 5,000 hours in eco mode. This not only reduces maintenance costs but also enhances the overall efficiency of the projector.

In conclusion, the NEC GT2000 and GT2000R projectors are equipped with a robust set of features, from high brightness and resolution to advanced connectivity options and color accuracy. Their durability and reliability make them ideal for professional and educational environments, meeting the demands of users who require high-quality projections for effective communication and learning.