E-37
Background
Blue
Black
Auto Start
On
Off
Auto Save
On
Off
Onscreen Mute
On
Off
Selecting the Background Color When There IsNo Signal [Background]
This is the setting of the background color when there is no input
signal.
1. Select [Settings Menu] → [Background] from the main menu.
2. Press the cursor ▲/▼ button and select the background color, then
press the ENTER button to set.
Blue...The background color will be blue.
Black...The background color will be black.
Selecting Auto Start [Auto Start]
When the main power switch is set to ON, this function switches
on the power without the need to press the power button.
1. Select [Settings Menu] → [Auto Start] from the main menu.
2. Press the cursor ▲/▼ button and select On/Off, then press the
ENTER button to set.
On .... The projector will start up when the main power is
switched on.
Off .... The projector will enter the standby mode when the
main power is switched on.
Selecting the Automatic Memory Save Function[Auto Save]
This function automatically saves the adjustment conditions to the
memory in use when screen adjustments or picture adjustments are
performed while projecting the image of the input equipment using
user memory or channel memory.
The auto save function saves the information when the MENU and
ENTER buttons are used upon exiting from the various adjustment
menus.
1. Select [Settings Menu] → [Auto Save] from the main menu.
2. Press the cursor ▲/▼ button and select On/Off, then press the
ENTER button to set.
On .... Auto memory saves are enabled.
Off .... Auto memory saves are disabled.
Selecting the On-screen Display ON/OFF[On-screen Mute]
This is a selection of whether or not to show displays other than on-
screen menu displays (such as simple condition displays, the ad-
justment bar which is displayed when the remote control VOL-
UME button is used to make an adjustment, and when switching
the input signal).
1. Select [Settings Menu] → [On-screen Mute] from the main menu.
2. Press the cursor ▲/▼ button and select On/Off, then press the
ENTER button to set.
On .... Displays will be muted.
Off .... Displays will not be muted.