E-38
The term switcher refers to the NEC ISS-6020 Switcher.
Switcher Control
Standalone
SW 1 Level
SW 2 Level
Ext. Control
On
Off
Projector ID
No.0 - 64
Selecting the Switcher Control Method [SwitcherControl]
The switcher is a unit that switches the input equipment when a
number of different video devices or computers are connected.
When the REMOTE 1 connector is used, input selection and
adjustment are permitted by the projector. See "Using User
Memory and Channel Memory" on Page E-56.
See "(Connections with the ISS-6020)" on Page E-28 for informa-
tion about connections.
1. Select [Settings Menu] → [Switcher Control] from the main menu.
2. Press the cursor ▲/▼ button and select the switcher connection
condition, then press the ENTER button to set.
Settings will become effective the next time the power is switched
on.
Standalone .......The projector used in stand alone opera-
tion.
SW 1 Level....... The projector used with one Switcher.
SW 2 Level....... The projector used with two or more
Switchers.
Selecting External Control Connections Settings[Ext. Control]
When using the EXT-CTL connector of the projector, set the
external control setting to [On].
1. Select [Settings Menu] → [Ext. Control] from the main menu.
2. Press the cursor ▲/▼ button and select On/Off, then press the
ENTER button to set.
On .... Enables the EXT-CTL connector.
Off .... Disables the EXT-CTL connector.
Setting the Projector ID Number [Projector ID]
Set identification numbers to the projectors when operating a
number of projectors (GT2000/GT2000R) by remote control or
when controlling a number of projectors by personal computer.
1. Select [Settings Menu] → [Projector ID] from the main menu.
2. Enter the ID number with the number buttons, then press the
ENTER button to set.
[00] will be set when using one projector.
When using a number of projectors, set [01] to [64].
• To delete the entry, press the CLEAR button of the remote control.
The setting will return to [00].
When operating a number of projectors by remote control, also set
the address of the remote control. See "Setting of the Remote
Control Address" on Page E-43.
Setting the ID of the projector to [00] permits remote control
operation irrespective of the ID of the remote control.