Using A Tabletop Or Cart
1.Place your LCD projector on a flat level surface at the optimal distance from the screen or wall so you realize the size image you want. (Avoid having bright room lighting or sun light directly on the screen or wall where you'll be projecting the image.)
2.Connect the power cable, remove the lens cap and turn the projector on. (If no input signal is available, the projector will display a background image.)
3.Ensure that the projector is square to the screen.
4.Move the projector left or right to center the image hori- zontally on the screen. (A)
5.To center the image vertically (B), lift the front edge of the projector and press the buttons on the front of the projector, just above the feet, to release the
justment for the front of the projector. When you need to set the projector at 10.5° projection angle or more, use
the lift kit that is supplied.)
6.To fine tune the image's position vertically on the screen, rotate each front foot.
7.Increase or reduce the size of the projected image by pressing the "Zoom" (+) or
(A) Top view
Screen
(B) Side view
Screen |
E – 14
