5. In this window, uncheck the two available items, then OK.
6.Connect to your SV8100 and download Database.
7.Click Programming > Unregistered Phones > IP Phone List.
8.Check required extensions to be used for IP DECT numbers. For example, extension 180 – 183 will be used.
9.Set MB 15‐05‐18 = Group 1 for required extensions.
10.Upload database changes.
11.Register all IP DECT extensions on DAP Manager and all phones will function.
Document No. SIB 244 | Page 37 of 52 | 1st July 2008 |
NEC Australia Pty Ltd shall not be liable for any direct, indirect, consequential or incidental damages about the use of the information included in this document. The information in this technical documentation is advisory in nature and is subject to change. NEC may make improvements and changes in the products described in this documentation without notice. Contents of this document are subject to change without prior notice at the discretion of NEC Australia Pty Ltd. This document has been prepared for use by employees and dealers of NEC Australia Pty Ltd and may not be reproduced without prior written approval of NEC Australia Pty Ltd.
