AP200S Specifications:
Air interface:
•Audio algorithm: G.726 ADPCM
•Full non‐blind slot DECT RF part, according to EN301406
•Frequency band: 1880 ‐ 1900 MHz, 10 carrier frequencies
•RF output: 20 to 24 dBm at antenna connection, Sensitivity: typical ‐90 dBm
•Dual omni‐directional internal antennas
•Typical range: indoor 20‐50 m, outdoor 300 m
Physical characteristics:
•Size: 235 x 45 x 172 mm (WxDxH)
•Weight: 540 g (incl. packaging)
•Housing: ABS/polycarbonate, light grey (colour code 70109)
•Classification: IP40
The DAP Manager:
The DAP Manager Software is used during installation and maintenance to:
•Subscribe Handsets
•Perform DAP management
The DAP Manager Software is used during operation to:
•Facilitate Portable Sharing and Handset to Handset messaging
•Allow DAPs to be connected in a Branch office
•Capture debug / system information
The DAP Manager is not required for normal, day‐to‐day operations (i.e. wireless communications), but should be running at all times that the DECT system is operational. The DAP Manager Software runs on a standard computer and can run alongside other applications, it does not require a dedicated server.
DAP Manager | SV8100 |
WAN
Head Office | Branch Office |
DAP Manager PC platform:
•Windows 2000 Server or Professional, Service pack 4
•Windows 2003 Server
•Windows XP Professional SP2
•CPU: minimum 2.4 GHz
•RAM: minimum 256 Mb
Document No. SIB 244 | Page 34 of 52 | 1st July 2008 |
NEC Australia Pty Ltd shall not be liable for any direct, indirect, consequential or incidental damages about the use of the information included in this document. The information in this technical documentation is advisory in nature and is subject to change. NEC may make improvements and changes in the products described in this documentation without notice. Contents of this document are subject to change without prior notice at the discretion of NEC Australia Pty Ltd. This document has been prepared for use by employees and dealers of NEC Australia Pty Ltd and may not be reproduced without prior written approval of NEC Australia Pty Ltd.
