NEC XL-3500 Remote control unit, 1Remote Jack, 3TEST Button, 4ADJUST Button, 5OPERATE Button, 7PIC CTL Button, ADISPLAY Button, 6Backlight Switch, 8SOUND CTL Button

1.PART NAMES AND FUNCTIONS

Remote control unit

1

POWER

INPUT

2

ON

OFF

1 ABC 2 DEF

3 GHI

3

TEST

4 JKL 5 MNO

6 PQR

H

4

7 STU 8 VWX

9 YZ/

5

ON

OPERATE

ADJUST

6

OFF

7

PIC CTL

SOUND CTL

10

,.

CAPTION

I

8

J

9

PIC MUTE

SOUND MUTE

INFO

INPUT LIST

K

0

L

DISPLAY

HELP

ZOOM/PAN POSITION

KELVIN

A

M

B

N

SIG LEVEL

R

G

B

O

C

GAMMA

ADDRESS

D

CURSOR

E

F

PIXEL CLK

G

PIXEL PHASE

P

Q

DELETE

STORE

S

NORMAL CTL ENTER END

T

U

V

R

You can use your remote control with the cable or wirelessly to operate your MultiSync Hivid 3500 Projector.

If you want to use your remote control with the cable, connect one end of the cable to the jack on the remote control and the other end to the REMOTE 2 IN jack of the projector.

1Remote Jack

Insert the supplied remote cable here.

2POWER Buttons (ON/OFF)

Press the ON button to turn the projector on when the projector is in the standby condition (STANDBY and RC READY indicators lit). Press the OFF button to return the projector to the standby condition.

3TEST Button

Press to display the TEST PATTERN menu from which you can select a test pattern.

4ADJUST Button

Press to display the ADJUST menu.

5OPERATE Button

Press to display the OPERATE menu.

6Backlight Switch

Turns the backlight on and off.

If no button operation is made within 30 seconds with the Backlight ON, the Backlight will turn off to conserve battery life. The light stays on in standby and power-on when the remote control is used as a wired remote.

7PIC CTL Button

Press to display the picture adjustment screen.

NOTE: Some function items will not be available depend- ing on the type of video signal.

8SOUND CTL Button

Press to display the VOLUME adjustment screen. You can adjust the volume of the ISS-6020/ISS-6020G Switcher. (when used with the ISS-6020 switcher on SW1 level or SW2 level mode)

9PICTURE (PIC) MUTE Button

Press to mute the picture. Press again to display the picture.

0SOUND MUTE Button

Press to mute the sound. Press again to return the sound. (when used with the ISS-6020 switcher on SW1 level or SW2 level mode)

ADISPLAY Button

Press to turn on or off the on-screen display. Pressing with CTL eliminates the on-screen display; pressing with CTL will restore display.

NOTE: Even if the on-screen display may be turned off with pressing CTL and DISPLAY, any adjustment will still change the projector’ s memory settings. This mode is available even when an input is switched to another or the power is turned off using the POWER OFF button on

the remote control.

12