3.OPERATION

Set Option

Passcode

■Entering Passcode

To prevent any unauthorized operation or mis-adjustment, the projector is equipped with a passcode option. If your passcode has not been entered correctly, the “Adjustment” menu will not be displayed. When the ADJUST button is pressed, and no passcode has been entered, the “Passcode?” screen is displayed. Enter your passcode.

To do this, proceed as follows:

1Press the ADJUST button.

• The “Passcode?” screen is displayed.

2Enter the four digit passcode you have already registered by using the “1” through “10” buttons.

1) Each time you press the INPUT button, an asterisk appears under the “Passcode?” message.

2) After you have finished entering the four digit passcode, press

ENTER.

NOTE: If you have made an error, press the NORMAL button to delete the asterisk “*”. Then re-enter the correct passcode. To delete all the entered digits, hold down the CTL button then press the NORMAL button.

3)If the entered passcode is correct, the “ADJUST” menu is displayed.

NOTE: If the passcode is not correct, the “Warning Different Passcode!!” message is displayed and you are required to enter the correct passcode.

P a s s c o d e ?

∗∗∗∗

3Proceed to each adjustment and setting.

52