3.OPERATION

Storing Projector Settings (Automatic Save Feature)

You have two options to store projector settings in the memory: automatically and manually.

*The Automatic Save Feature mode has been set to "DISABLE" by factory. For information on setting, see "Automatic Auto Data Store" on page 64.

■When the Automatic Save Feature mode is set to "ENABLE", pro- jector settings will be stored in the projector' s memory automati- cally.

Settings are stored automatically when any one of the following procedures is performed:

•One input is switched to another.

•The projector is turned off.

•After every 10 minutes of elapsed time.

■When the Automatic Save Feature mode is set to "DISABLE", pro- jector settings can be stored in the projector' s memory manually. When you try to return the source screen by pressing END several times, the "STORE?" menu is displayed.

To manually save settings, proceed as follows:

1.Use the END button to display the "STORE" menu from the cur- rent adjustment screen or menu.

2.Use the CURSOR or button to highlight "Yes" or "No" and press ENTER.

Items to select

•Yes ---- Overwrites the currently projected signal and saves the settings. Note that "Yes" is available only for registered signals.

•No ----- Does not save settings.

S t o r e ?

Y e s

N o

29