1.PART NAMES AND FUNCTIONS

BHELP Button

Press to display the explanation of the current selected function and available functions.

CSIG LEVEL Button

Press to display the SIGNAL LEVEL menu. You can set the level for an RGB or YUV signal.

DGAMMA Button

Press to display the GAMMA CORRECTON menu. You can select two options.

EADDRESS Button

Press to display the ADDRESS menu. Pressing with CTL allows you to specify the address for the remote control.

FPIXEL CLK Button

Press to display the PIXEL CLOCK adjustment screen. You can adjust a picture width to the screen by adjusting the clock frequencies to eliminate the vertical banding in the image.

GPIXEL PHASE

Press to display the PIXEL PHASE adjustment screen. You can adjust the clock phase to reduce video noise, dot interference or cross talk. (This is evident when part of your image appears to be shimmering.)

HINPUT Button

Selects menus and switches input signals.

ICAPTION Button

Press to display the CLOSED CAPTION menu.

JINFO Button

Press to display the various parameters and settings of the currently displayed image. Pressing with the CTL button displays some of items available in.

KINPUT LIST Button

Press to display the memory list of the recorded input signals.

LZOOM/PAN Button

Press to display the ZOOM adjustment screen. The zoom function enlarge or reduce the projected image. Pressing with CTL displays the PAN adjustment screen. The pan function enlarge or reduce the selected part of an image.

MKELVIN Button

Press to enter the KELVIN mode. You can adjust the color temperature.horizontal, vertical position and horizontal, vertical blanking and image size.

NPOSITION Button

Press to enter the position mode. You can adjust the

OR, G, and B Buttons

The R and B buttons are used for Uniformity only.

PCURSOR Buttons

Used for increasing and decreasing control levels, cursor movement and convergence adjustments.

QDELETE Button

Used to delete characters or numbers you typed.

RNORMAL Button

Returns the standard level for each signal. When pressed once, the confirmation message will be displayed. When “YES” is selected and ENTER is pressed, the data will be returned to the standard level. While holding down the CTL button, press the NORMAL button to display the LOAD menu to select the LOAD (last stored level).

SSTORE Button

Memorizes the adjustments setting of each signal sepa- rately.

When pressed once, the confirmation message “STORE?” will be displayed. When selecting “YES” and ENTER, the data will be stored in memory.

TEND Button

Ends the adjustment mode.

UENTER Button

Executes menu selection and switches to selected input.

VCTL Button

Used in conjunction with other buttons, similar to a shift key on a computer.

13