NETGEAR CG814M manual Running Diagnostic Utilities

Reference Manual for the Model CG814M Wireless Cable Modem Gateway

Running Diagnostic Utilities

The CG814M Gateway has a diagnostics feature. You can use the diagnostics menu to test connectivity to PC using the Ping command:

From the Main Menu of the browser interface, under the Maintenance heading, select the Diagnostics menu, shown in Figure 5-5.

Figure 5-5: Diagnostics menu

To perform a Ping test

1.In the Ping Target section, enter the IP address of the PC you would like to ping.

2.If you would like to specify additional details, you can set the Ping Size, No. of Ping and Ping Interval.

3.Click Start Test.

4.Click REFRESH to see the results of the Ping test.

Managing Your Network 5-9