Right Side Panel with WPS and WiFi On/Off Buttons | NETGEAR D6100

AC1200 WiFi DSL Modem Router—Essentials Edition Model D6100

Right Side Panel with WPS and WiFi On/Off Buttons

The right side panel provides the WiFi On/Off button and the WPS button.

WiFi On/Off button

WPS button

The following table describes the buttons.

Table 2. Button descriptions

Button	Icon	Description
WiFi		By default, the 2.4 GHz and 5 GHz WiFi radios are enabled. Pressing this button for two
On/Off		seconds disables both radios. Pressing the button again for two seconds enables both
		radios.
		If you disable the radios, the WiFi LED on the front panel turns off. If you enable the
		radios, the WiFi LED on the front panel lights blue.
WPS		Pressing this button for two seconds activates WPS (Wi-Fi Protected Setup) to let you add
		a WiFi device to the WiFi network without typing the WiFi password.

While WPS is active, the WiFi LED on the front panel blinks blue.

Hardware Overview of the Modem Router

13

Image 13

Contents

AC1200 WiFi DSL Modem Router- Essentials Edition Compliance SupportTrademarks Contents Manage the WiFi Network Settings Manage the WAN and LAN Network Settings Manage Firewall Rules, Port Forwarding, and Port Triggering Appendix a Supplemental Information Router Your package contains the following items Unpack Your Modem Router Modem router displays status LEDs on the front panel Front Panel with LEDs LED descriptions Power LED turns solid green Modem router back panel Back Panel with Ports, Buttons, and Connector Button Icon Description Right Side Panel with WPS and WiFi On/Off Buttons Modem router product label Bottom Panel Product Label Install and Access the Modem Router and Its Network Position Your Modem Router WiFi Connection Wired ConnectionTypes of Logins Before You Connect to the Modem Router Netgear genie Automatic Setup Utility DSL Service Set Up Your Modem Router for DSL Service Modem router cabling for DSL service  To connect your modem router to a DSL service Install and Access the Modem Router and Its Network Install and Access the Modem Router and Its Network Install and Access the Modem Router and Its Network Install and Access the Modem Router and Its Network Install and Access the Modem Router and Its Network Set Up Your Modem Router for Cable or Fiber Service Modem router cabling for cable or fiber service  To connect your modem router to a cable or fiber service Install and Access the Modem Router and Its Network Install and Access the Modem Router and Its Network Install and Access the Modem Router and Its Network Install and Access the Modem Router and Its Network Read Troubleshoot the Internet Connection on  To log in to the modem router  To change the language Change the Language Select Advanced Administration Set Password Let the Modem Router Automatically Update Its Firmware Set Up Password Recovery To set up password recovery Select the Enable Password Recovery check box  To use the genie app to access the modem router Access the Modem Router with the Netgear genie App Install and Access the Modem Router and Its Network Manage the Internet Settings Manually  To use the Setup Wizard Use the Internet Setup Wizard After Initial SetupSelect Advanced Setup Wizard Manage the Internet Settings Manually Manage the Internet Settings Manually Manage the Internet Settings Manually Manage the Internet Settings Manually Specify an Internet Connection Without a Login Manually Set Up the Internet Connection Internet IP Address Field Description Router MAC Address Domain Name Server DNS AddressNAT Network Address Translation Manage the Internet Settings Manually Or Manually Connect Domain Name Server DNS Address From the Encapsulation menu, select PPPoE PPP over Ethernet Enter the settings as described in the following table Internet IP Address From the Encapsulation menu, select PPPoA PPP over ATM Enter the settings as described in the following table IPv6 Internet Connections and IPv6 Addresses Specify an IPv6 Internet ConnectionField Description Internet IP Address Set Up and IPv6 Connection Through Auto Detect From the Internet Connection Type menu, select Auto Detect From the Internet Connection Type menu, select Auto Config Set Up and IPv6 Connection Through Auto Config Manage the Internet Settings Manually From the Internet Connection Type menu, select 6to4 Tunnel Set Up an IPv6 6to4 Tunnel Connection Manage the Internet Settings Manually  To set up an IPv6 pass-through Internet connection Set Up an IPv6 Pass-Through Connection  To set up a fixed IPv6 Internet connection Set Up an IPv6 Fixed ConnectionFrom the Internet Connection Type menu, select Fixed Manage the Internet Settings Manually  To set up an IPv6 Internet connection with a Dhcp server Set Up an IPv6 Dhcp ConnectionFrom the Internet Connection Type menu, select Dhcp Manage the Internet Settings Manually  To set up an IPv6 PPPoE Internet connection Set Up an IPv6 PPPoE ConnectionFrom the Internet Connection Type menu, select PPPoE Manage the Internet Settings Manually MTU Concepts Manage the MTU SizeApplication Change the MTU Size Manage the WiFi Network Settings  To view or change the basic WiFi settings View or Change the Basic WiFi Settings Manage the WiFi Network Settings Field Description Region Selection Wireless Network 2.4GHz b/g/n Field Description Security Options Wireless Network 5GHz 802.11a/n/ac To 173 Mbps  To configure WPA/WPA2 enterprise security Configure WPA/WPA2 Enterprise WiFi Security Manage the WiFi Network Settings  To configure WEP security Configure WEP Legacy WiFi Security Use WPS to Add a Device to the WiFi Network Select Advanced WPS Wizard Use WPS with the Push Button Method Use WPS with the PIN Method Manage the WiFi Network Settings Select Guest Network  To set up a guest network Enable Ssid Broadcast check box Field Description Wireless Network 2.4GHz b/g/nTo access My Local Network check box Security Options Profile Ssid Broadcast check box Field Description Wireless Network 5GHz a/n/ac Use the WiFi On/Off Button Control the WiFi RadiosEnable or Disable the WiFi Radios Select Advanced Advanced Setup Wireless Settings  To enable or disable the WiFi radios  To set up the WiFi schedule Set Up a WiFi Schedule Manage the WiFi Network Settings  To manage WPS Settings Manage the WPS Settings  To manage advanced WiFi features Manage Advanced WiFi Features Preamble Mode  To set up the modem router as an AP Use the Modem Router as a WiFi Access PointTransmit Power Control menu Select Advanced Advanced Setup Wireless Access Point Control Access to the Internet  To set up parental controls Set Up Parental ControlsSelect Parental Controls Control Access to the Internet Enable and Manage Network Access Control Allow or Block Access to Your NetworkClick the Take me to the status screen button  To set up network access control  To add or remove devices that are allowed Manage Network Access Control Lists Control Access to the Internet 103  To add or remove devices that are blocked Add or Remove Devices from the Blocked List  To set up keyword and domain blocking Set Up BlockingUse Keywords to Block Internet Sites Select Advanced Security Block Sites Control Access to the Internet 106 Remove All Keywords and Domains from the Blocked List Remove a Keyword or Domain from the Blocked List To remove a keyword or domain from the blocked list  To remove all keywords and domains from the blocked list  To specify a trusted device Specify a Trusted Computer  To set up a schedule for blocking Select Advanced Security Schedule  To set up email notifications Set Up Security Event Email Notifications Send Alert Immediately Field Description Send alerts and logs through e-mailSend logs according to this schedule Optimize Performance Optimize Traffic with QoS Select Advanced Setup QoS Setup Add a Custom QoS Rule for a Service or Application Manage Default and Custom QoS RulesSelect the Turn Internet Access QoS On check box  To add a QoS rule for a service or application Optimize Performance 116 From the Applications menu, select Add a new application  To add a QoS rule for a device Add a Custom QoS Rule for a DeviceField Description Specified Port Range Optimize Performance 118  To change a QoS rule Change a QoS Rule or Change the Priority for a Rule  To remove a QoS rule Remove a QoS Rule Remove All QoS Rules Manage Uplink Bandwidth Control To remove all QoS rules Click the OK button Basic Home screen displays  To manage Universal Plug and Play Improve Network Connections with Universal Plug and Play  To disable WMM QoS Manage Wi-Fi Multimedia Quality of Service Settings  To view or change the DSL setup Manage the Adsl SettingsSelect Advanced Setup Adsl Settings  To change the WAN connection preference Change the WAN Connection Preference  To change the default WAN security settings Manage the WAN Security Settings  To set up a default DMZ server Set Up a Default DMZ Server Manage Igmp Proxying and VPN Pass-Through  To change the default NAT filtering settings Enable and Configure a VlanManage NAT Filtering  To change the default SIP ALG setting  To enable and configure the VlanSelect Advanced Setup WAN Setup Manage the SIP Application-Level Gateway Select Advanced Advanced Setup Dynamic DNS Set Up a New Dynamic DNS AccountManage Dynamic DNS Specify a DNS Account That You Already Created  To set up Dynamic DNS if you already created an account Select the Use a Dynamic DNS Service check box Manage the Modem Router’s LAN IP Address Settings Select Advanced Setup LAN Setup  To change the LAN IP address settings  To manage the RIP settings Manage the Router Information Protocol Settings Reserve a LAN IP address Manage Reserved LAN IP Addresses To reserve an IP address Remove a Reserved IP Address Entry Change a Reserved IP Address To change a reserved IP address entry  To remove a reserved IP address entry Manage the Dhcp Server Address Pool Change the Modem Router’s Device Name To change the modem router’s device name Manage the WAN and LAN Network Settings 141  To disable the built-in Dhcp server Disable the Built-In Dhcp ServerClear the Use Router as Dhcp Server check box Set Up a Static Route Set Up and Manage Custom Static Routes To set up a static route Manage the WAN and LAN Network Settings 144 Remove a Static Route Change a Static Route To change a static route  To remove a static route Manage the WAN and LAN Network Settings 146 Manage the Modem Router Monitor the Traffic Check for New Firmware and Update the Modem Router Update the Firmware of the Modem Router To check for new firmware and update your modem router Manually Upload New Firmware and Update the Modem Router D6100-V1.0.0.340.0.34.img Back Up the Settings Manage the Configuration File of the Modem RouterRestore the Settings  To back up the modem router’s configuration settings  To recover your password Recover the admin Password Use the Reset Button Return the Modem Router to Its Factory Default Settings To reset the modem router to factory default settings  To erase the settings Erase the Settings Select Advanced Advanced Home View the Status and Statistics of the Modem Router Field Description Router Information Manage the Modem Router and Monitor the Traffic 156 Internet Port Wireless Settings 2.4GHz Guest Network 2.4GHz Wireless Settings 5.0GHz Guest Network 5.0GHz View the Traffic Statistics Adsl Link Field or Column Description  To view or change the TCP/IP Internet connection status View or Change a TCP/IP Internet Connection Manage the Modem Router and Monitor the Traffic 162 View or Change a PPPoE or PPPoA Internet Connection View or Change a Pptp or L2TP Internet Connection Manage the Activity Log and Syslog Select Advanced Administration LogsView the Logs  To manage which activities are logged and view the log Manage the Modem Router and Monitor the Traffic 166 Specify a Syslog Server Specify Which Activities Are Logged To manage which activities are logged View Devices Currently on the Network  To display the wired and WiFi devicesSelect Attached Devices Select Advanced Advanced Setup Traffic Meter Start the Traffic Meter Without Traffic Volume RestrictionsMonitor and Meter Internet Traffic View the Traffic Statistics and Traffic Status  To record and restrict the Internet traffic by volume Restrict Internet Traffic by Volume Select the Traffic volume control by radio button  To record and restrict the Internet traffic by time Restrict Internet Traffic by Connection Time  To unblock the traffic meter Unblock the Traffic Meter After the Traffic Limit Is Reached Select Advanced Advanced Setup Remote Management  To set up remote managementManage the Modem Router Remotely Select the Turn Remote Management On check box  To use remote access Configure the Modem Router as a DSL Modem Only To configure the modem router as a DSL modem only From the Device Mode menu, select Modem Modem Only Manage Firewall Rules, Port Forwarding, and Port Triggering  To add an outbound firewall rule Add an Outbound Firewall RuleSelect Advanced Security Firewall Rules Block by schedule, otherwise allow Block alwaysAllow always Allow by schedule, otherwise block  To change an outbound firewall rule Change an Outbound Firewall Rule  To change the priority of an outbound firewall rule Change the Priority of an Outbound Firewall Rule  To enable or disable an outbound firewall rule Disable or Enable an Outbound Firewall Rule  To remove an outbound firewall rule Remove an Outbound Firewall Rule Select Advanced Security Firewall Rules Starting Port field  To change a custom service or application Following figure shows two entries in the Service Table  To remove a custom service or application AC1200 WiFi DSL Modem Router-Essentials Edition Model D6100 AC1200 WiFi DSL Modem Router-Essentials Edition Model D6100 Click the Add Custom Service button  To change a port forwarding rule Change a Port Forwarding Rule  To remove a port forwarding rule Remove a Port Forwarding Rule  To make a local web server public Application Example Make a Local Web Server Public How the Modem Router Implements the Port Forwarding Rule Manage Port Triggering for Services and Applications  To add a port triggering rule Add a Port Triggering Rule  To change a port triggering rule Change a Port Triggering RuleInbound Connection AC1200 WiFi DSL Modem Router-Essentials Edition Model D6100  To remove a port triggering rule Remove a Port Triggering Rule  To disable port triggering Disable Port TriggeringSpecify the Time-Out Period for Port Triggering  To specify the time-out for port triggering Application Example Port Triggering for Internet Relay Chat Clear the Disable Port Triggering check box AC1200 WiFi DSL Modem Router-Essentials Edition Model D6100 Diagnostics and Troubleshooting Ping an IP Address Perform DiagnosticsPerform a DNS Lookup  To ping an IP address  To display the routing table Display the Routing Table Reboot the Modem Router from the Web Management Interface Quick Tips for TroubleshootingProblem Possible Solution Bottom Panel Product Label on Troubleshoot with the LEDs Power LED Is Off Power LED Remains Solid AmberWiFi LED Is Off You Cannot Log In to the Modem Router Troubleshoot the DSL Link Troubleshoot the Internet Connection Obtain an Internet IP Address Internet LED Is Off To check the Internet IP address  To verify that your PPPoE or PPPoA connection is working Troubleshoot PPPoE or PPPoA Troubleshoot Internet Browsing Changes Are Not Saved Troubleshoot the WiFi Connectivity Test the LAN Path to Your Modem Router Troubleshoot Your Network Using the Ping Utility To ping the modem router from a Windows computer Test the Path from Your Computer to a Remote Device Supplemental Information Feature Default Behavior Router login Factory SettingsMain WiFi network Internet connection Guest WiFi network Feature Default BehaviorGeneral WiFi settings Feature Description Technical Specifications Supplemental Information 221