AC1200 WiFi DSL Modem Router—Essentials Edition Model D6100

The modem router delivers the following parameters to any LAN device that requests DHCP:

An IP address from the range that you define

Subnet mask

Gateway IP address (the modem router’s LAN IP address)

DNS server IP address (the modem router’s LAN IP address)

To specify the pool of IP addresses that the modem router assigns:

1. Launch an Internet browser from a computer or WiFi device that is connected to the network.

2. Type http://www.routerlogin.net. A login screen displays.

3. Enter the user name and password for the modem router.

The user name is admin. The default password is password. The user name and password are case-sensitive.

4.Click the OK button.

The BASIC Home screen displays.

5.Select ADVANCED > Setup > LAN Setup.

6.Make sure that the Use Router as DHCP Server check box is selected. This check box is selected by default.

7.Specify the range of IP addresses that the modem router assigns:

In the Starting IP Address field, enter the lowest number in the range.

This IP address must be in the same subnet as the modem router. By default, the starting IP address is 192.168.0.2.

Manage the WAN and LAN Network Settings

141

Page 141
Image 141
NETGEAR D6100 user manual Manage the WAN and LAN Network Settings 141