AC1200 WiFi DSL Modem Router—Essentials Edition Model D6100

2.Using a straightened paper clip, press and hold the Reset button for eight seconds.

3.Release the Reset button.

The configuration is reset to factory default settings. When the reset is complete, the modem router reboots. This process takes about one minute.

WARNING:

To avoid the risk of corrupting the firmware, do not interrupt the reset. For example, if you are connected to the web management interface, do not close the browser, click a link, or load a new page. Do not turn off the modem router. Wait until the modem router finishes restarting and the Power LED turns solid green.

Erase the Settings

CAUTION:

This process erases all settings that you configured in the modem router.

To erase the settings:

1.Launch an Internet browser from a computer or WiFi device that is connected to the network.

2.Type http://www.routerlogin.net. A login screen displays.

3.Enter the user name and password for the modem router.

The user name is admin. The default password is password. The user name and password are case-sensitive.

4.Click the OK button.

The BASIC Home screen displays.

5.Select ADVANCED > Administration > Backup Settings. The Backup Settings screen displays.

6.Click the Erase button.

7.To confirm the action, click the Yes button.

The configuration is reset to factory default settings. When the reset is complete, the modem router reboots. This process takes about one minute.

Manage the Modem Router and Monitor the Traffic

154

Page 154
Image 154
NETGEAR D6100 user manual Erase the Settings,  To erase the settings